Gungnir Dartstracker

Shopping list - Gungnir Dartstracker

Below the list of required components needed to build the Gungnir Dartstracker yourself. Mind that a complete assembled dartstracker can also be ordered from the webshop.

Ledstrip

Use a 6000k white ledstrip like the Lepro PR4100057-DW to light the surround. Mind that the image processing settings in the downloaded sd-card images are configured to work with this ledstrip. Using another ledstrip will mean you have to configure these yourself.
  

USB Camera module

Ledstrip Adapter


Use a Ledmo 12V 5A ledstrip adapter or equivalent.

Raspberry Pi 4 - 2Gb

Raspberry Pi

A Raspberry 4 with minimal 1 GB memory and the 3A adapter. 


5A adapter

RPI Case with active cooling

For the RPI-4 we recommend a case with active cooling for example the Geeekpi RPI-4 case which also has a nice led light on the fan.

Backplate

A round MDF backplate with a diameter of 80 cm. Preferably white in case you don't have a flat surface to attach the surround to already.

Nuts & Bolts

To hold it all together you'll need M4 20mm bolts & nuts and screws to screw the camera/cable foots to a backboard. Some tie wraps  can be used to mount the Raspberry Pi on the cable foot. Double sided tape (or something alike) is needed for fixating the camera's. Instant glue is always handy to repair stuff.
 

Mounting Set

Something like the Bull's Deluxe Mounting Set which offers 2 additional features apart from just mounting the board. It has a waterlevel to see if the surround is level and it fixes the rotation of the dartboard on a sector. Both are very useful for a system like this. But it seems to be out of stock everywhere, so the Bull's Rotating Fix Bracket in combination with a waterlevel of your own will suffice too.

Dartboard surround

4 USB Camera modules 

The Gungnir Elite uses OV9732 modules with the undistorted 100 degrees FOV lens from the picture. You need at least 4 of them, but it's wise to have at least 1 extra as spare. Also order at least 4 cables of minimal 1.5 meter. Choose the 4P 2.0MM options as cable type. 

3D printed parts

3D Printed parts 

The 3D printed parts to assemble the surround ring can be ordered in the webshop.

© Copyright 2024 - Gungnirdarts. All Rights Reserved.