Gungnir Elite
Shopping list - Gungnir Elite Dartstracker
Below the list of required components needed to build the current Gen 2 of the Dartstracker yourself. Mind that a complete assembled dartstracker can also be ordered from the webshop here.
Gungnir Elite
Below the list of required components needed to build the current Gen 2 of the Dartstracker yourself. Mind that a complete assembled dartstracker can also be ordered from the webshop here.
Use this 6000k daylight white Lepro PR4100057-DW ledstrip to light the surround. It can be ordered here. Mind that the image processing settings in the downloaded sd-card images are configured to work with this ledstrip. Using another ledstrip will mean you have to configure these yourself.
Use this Ledmo 12V 5A ledstrip adapter.
For the RPI-4 we recommend the Geeekpi RPI-4 case with active cooling (and nice led light on the fan) which can be ordered here.
A round MDF backplate with a diameter of 80 cm. Preferably white in case you don't have a flat surface to attach the surround to already.
To hold it all together you'll need 10 M4 20mm bolts & nuts and 5 screws to screw the camera/cable foots to a backboard. Some tie wraps can be used to mount the Raspberry Pi on the cable foot. Double sided tape (or something alike) is needed for fixating the camera's. Instant glue is always handy to repair stuff.
I'm using the Bull's Deluxe Mounting Set which offers 2 additional features apart from just mounting the board. It has a waterlevel to see if the surround is level and it fixes the rotation of the dartboard on a sector. Both are very useful for a system like this.
The Gungnir Elite uses these OV9732 modules with the undistorted 100 degrees FOV lens from the picture. You need at least 4 of them, but it's wise to have at least 1 extra spare. Also order at least 4 cables of 1.5 meter through this link. Choose the 4P 2.0MM options.
The 3D printed parts to assemble the surround ring can be ordered here.
